Researching your Manufacturing and Construction Software Vendor
By admin | June 27, 2009
Why it is Important:
A lot of industry professionals will argue that evaluating the vendor of your next construction software package is just as important as evaluating the product itself. Why? Imagine that you’ve purchased the software that you believe will be the ideal solution, you’ve installed it on your company’s system, and have trained your staff. Initially, everything is as perfect as you expected. You are completely satisfied with your purchase and believe that you’ll quickly gain a competitive advantage as a result of the new software. Then it happens - a glitch in the software that takes your software from a life-saver to a death-sentence. So what do you do? Call the vendor, of course! This is where the quality of your vendor will becomes the most important thing in your company’s ability to move forward without losing time and money. If you’ve researched your vendor and chose one that is as good as the software that they sold you, you should be up and running again in no time. However, if you haven’t researched you vendor, this minor glitch can quickly turn in to the kind of thing that sets you back days or even weeks.
Given that, it’s important to know what to do to ensure that you select the right software AND the right vendor. There are several things that you need to consider in this process of vendor evaluation - here are a few ideas.
Where to Begin:
A good place to start your research in on the product’s website. How many versions of the product have been released in the past? What improvements were made with each edition? What level of support did the vendor offer for previous versions? How has the level of support improved over time? What level of support is still offered for companies that use an older version of the software? Take all of these things in to consideration to get an idea of what kind of support you can expect throughout the time that you use the software. Many companies forget that they may be using the same software 5 years down the road, so be sure to check for what kind of support is offered for companies that bought software from the particular vendor 5 years ago.
Next, do some internet searches on the product and vendor. If you can find some construction software reviews or construction software comparison sites, take a look at them to see how they stack up. Also look for news articles that mention lawsuits or relatively recent changes in ownership and learn about the causes and issues involved. Both can indicate an unstable organization that may not be able to provide the long-term support that you’ll need. Or, worse, a company that is on its way out of the market, which could leave you up a creek without a paddle down the road. If ownership has recently changed, look for information about any changes in support levels. It could be better, but it could also be worse.
Finally, check within your industry with other users of the software or independent agencies that provide free construction software reviews. Speak with friends and colleagues that use the software you’re considering and ask about their past experiences. Check online forums for user experiences. Also look to see if the product website has a forum - these can be extremely valuable resources for getting tips and troubleshooting advice from other executives that use software from your potential vendor.
The bottom line is that you will do your company a huge disservice if you fail to research your software vendor. The best manufacturing erp software product in the world will be useless if you can’t get the right support when things inevitably go wrong. Taking the time up front could very well save you valuable time and money down the line, ensuring that you get the most out of your software for many years to come.
Topics: Computers | No Comments »
Having Accounting Software With a Clean Layout is Important
By admin | June 1, 2009
Having a clean layout of the user interface in accounting software is extremely important. Most accounting software comparison will give a lot of time and attention to the user interface, so detailed analysis of the layouts of various pieces of software are pretty easy to come by.
How will you save time and money with a cleaner interface?
Having a clean layout is important because accounting is complex and difficult to understand - especially for individuals with minimal accounting experience. Even the terminology - credits, debits, assets, and so on get confusing to some and can be the kind of things that turn people off from accounting, despite the importance of it. This is why it is important to find software that makes entering information easy and possible without knowledge of what kind of transaction was just completed (in accounting language). Once the info is in the system, the software also needs to be able to generate reports that can be understood by someone without an accounting background.
People who work with accounting software aren’t dense by any means. Far from it. They simply want to spend less time working on things that can be automated so they can focus on the day-to-day aspects and complexities of running a small business. Accounting is necessary in order to look at the wider aspects of a business, but it is not (usually) particularly enjoyable.
Therefore, the best kind of accounting software for most businesses is an application that has an easy to use interface and does the complicated accounting calculations “behind the scenes.” In the end, decision makers want to review the reports, not spend time creating them in the first place.
Also, keep in mind that having software with a clean layout does not mean you have to settle for software that is less powerful. In some cases it does, but it does not have to. Instead, a clean interface should make the software easier to use and translate in to more efficient analysis of costs and revenues.
An example of a clean interface is the invoicing feature that is common to all accounting programs. Some common programs will begin with the general ledger and will allow you to create an invoice from there, but this is not the most effective method for most people to invoice.
A much better way to handle the interaction between invoices and general ledger for a number of companies is software that has a simple invoice interface. From here, users can create an invoice and the software will automatically update the general ledger. Further, once the invoice is paid, a simple click will again update the ledger to reflect the change. Since most businesses deal with invoices on a daily basis, it is much eaiser for them to use software that updates itself as the invoices are changes versus having to update the ledger manaully.
If you’re searching for new accounting software, check accounting software comparison sites and look at screen shots of the software’s interface. This should give you a good idea of how easy to use the software will be for you. If the interface looks complicated, chances are that it is and you should look for a better solution.
Since accounting programs are meant to save time, the least reasonable thing one can do in picking a financial program is to pick one that will take more time to learn than will be gained by the business in the long term.
Also consider who will be using the software. If a number of employees will be using the software, get feedback from them about their impressions of a new software packages usability and make sure that you account for the necessary training when budgeting for the investment.
New accounting software should add value to your company. Make sure that you choose a package that will be easy to use and will deliver the ROI that you’re searching for in terms of time saved.
Topics: Computers | No Comments »
Small Business Accounting Software Requires No Special Accounting Knowledge
By admin | May 30, 2009
Holding back on implementing new accounting software at your business because you feel that you or your employees lack the accounting knowledge to use the software? Confused about what you need to know and don’t need to know when you look at a accounting software comparison? You are not alone. After all, isn’t that what accountants are for?
Relax and feel better knowing that your fears are somewhat unfounded. Certainly, people that understand accounting will understand exactly what the software is doing at a much higher level, but that does not mean that you need to understand what the software does to benefit from it. Most people are surprised to learn that using most accounting software is not much harder than using a database or other similar piece of software.
Granted, somebody with formal training in accounting will be able to look at software and see how it complexly calculates and tracks credits, debits, assets, and so on.
That is not to say that this knowledge is necessary, however, to improve your company’s operations with small business accounting software. The reality is that since the software performs these tasks for you, the majority of the users at your company will get by with only knowing how to input data and produce reports with the software.
Case in point: If you are responsible for tracking the sales and invoices for your organization but have no special accounting training, software can be very beneficial. Most people that are comfortable working with computers can learn how to input invoices, close them out, and email them to customers. This requires no special accounting knowledge.
Further, most accounting software is relatively simple to learn. While experienced accountants will be able to “get more” from accounting software reports, most businesses will benefit from the ease of use, improved accuracy, and increased efficiency that software can provide without knowing the specialized accounting skills that an accountant does.
In fact, most accounting software is designed specifically for users like yourself - those with minimal accounting knowledge and training. The actual tasks that the software performs and how they do them is not as important as how well the software does this work and how it can help businesses.
A quick look at accounting software comparison reinforces this point. Most reviews and comparisons focus on things like usability and avoid talking about complex accounting tasks since most software is not designed for advanced accounting professionals. While accounting professionals certainly use the software, manufacturers have to design their software to be usable by the people without those skills or risk severely limiting their target market.
So, who wins?
In the end, companies like yours benefit the most. Since software companies have to design software that will benefit people with minimal accounting experience, an industry has grown around simple to use, yet effective, software applications that require minimal accounting experience for most functions.
It is important to note, though, that the more that you know and understand about accounting, the better off you will be. Software is designed to be simple to use, but can also be extremely powerful in the hands of accounting specialists. Even if you have software that helps your business, you should always take every opportunity that you can to learn more about accounting practices so that you can find was to use your software to make your company even better.
Think of it like this: You don’t need to know how to build a car to drive one, but understanding car mechanics and having the knowledge to fix your car when it breaks certainly makes owning and driving a car a much more enjoyable experience. The same can be said about accounting software.
Topics: Computers | No Comments »
VoIP - A Net Service that is Useful to Keep Money on Phone Billing
By admin | May 21, 2009
Some of you probably have ever heard about VoIP but this word may be still strange to lots of the people. I’m sure that even those who are familiar with this term actually don’t know precisely what VoIP is.
Voice over Internet Protocol, or often called VoIP, is one sort of technology that everyone should be aware of. As a matter of fact, VoIP is simply the voice traffic transmission over IP-based networks. In the main, this gives more cost advantages to consumers compared to traditional telephone networks. Thus the exertion of this system has become extremely popular over the past couple of years.
VoIP becomes popular and very helpful as every person is interested in saving money. Nearly all Americans pay a flat monthly fee for local telephone calls and a per-minute charge for any long-distance calls. Nevertheless, with the use of a VoIP phone calls can be placed across the Internet, and it is totally free of charge but not for paying the cost of your Internet bill of course.
Types of Calls
As a matter of fact, there are a few different calls types that can be made here. These telephone calls can either be placed to traditional telephones on the PSTN, or to other VoIP tools. This makes it incredibly easy as well as convenient to get started if you want to make the switch, and there are three methods that you can use to connect to a VoIP network: using a VoIP telephone, using a normal telephone with a VoIP adapter, and using a computer with speakers as well as a microphone.
If you want to learn more about this service before you make the switch, there are several terrific options existing for you. The best idea however would be to read some of the many different books that are existing on the issue.
The Internet is a great resource, and not only for learning about this service and all the benefits that it has to offer, but also enable you to find all the equipment that you would have to make the switch online.
So, before going through with it and making the switch, make certain that you are aware of all the benefits that this service has to offer. This is because you want to make certain that you are aware of all you going to be getting in return.
Surely, VoIP is an awesome service that is worth for you to see. As more and more people are learning more about this service as well as understanding all the benefits provided, it continues to gain in popularity.
Want to know further about VoIP? Let’s explore more on the links here and you will get much more about it as well as any thing related.
Topics: Technology and Gadgets | No Comments »
Better Than Sliced Bread… Drop Shipping, The New Home Business Craze. Helpful Info to Remember
By admin | May 6, 2009
Better Than Sliced Bread… Drop Shipping, The New Home Business Craze
Many of you will probably remember the days when the only way to start a successful home business was to join some sort of multi-level marketing program or sell makeup at parties. In those days, people would have to buy a membership in the ‘program’ along with an inventory of sample products that they would then sell to friends and coworkers at ‘parties.’ Most people were not very successful at this and made very little money and usually alienated their friends and family. In the 1990’s however, all of that changed for the better with the advent of the Internet and a retail delivery method called wholesale drop shipping.
Wholesale drop shipping is when a wholesale distributor or manufacturer agrees to send out single unit products to customers for a retailer. Many will also even include the retailers name on the invoice so that the customer is never even aware that they got it from anyone else but the retailer. This, along with the Internet has changed the whole dynamics of home businesses in America, making it easier and more cost effective to start your own business.
Home business owners are now able to launch a business without purchasing any inventory up front and are able to open a ‘store’ without ever having to find a place to setup shop. Millions of Americans have setup ecommerce sites on the internet selling everything from Personal Computers to lawn care equipment all using wholesale drop shipping. As a matter of fact, according to eBay over forty thousand people make their full time living on their auction site alone; many of these are using drop shipping as their main method of product fulfillment.
The only problem for today’s small business owner is how to find wholesalers to drop ship. In general wholesale distributors don’t make it a habit of getting out there and advertising; obviously the whole reason they are in wholesale and not retail is to get away from doing all of that work. So it makes it very difficult for someone who has little or no business experience to make contacts with distributors when they aren’t even sure where to start looking.
To help out those small business owners I’d like to offer some advice for finding wholesale distributors:
Look for trade organizations and magazines to help you make contacts. Many trade organizations out their produce some sort of listings of their members, many of whom may drop ship.
Contact manufacturers. People don’t realize that if you call the manufacturer they will provide you with a list of their distributors; so if you are looking for a particular product, ask the manufacturer. The down side of this route is that they may have hundreds of distributors that you may have to contact before you find one that is willing to drop ship.
Find wholesale chat rooms and message boards. There are many message boards on the Internet today that are devoted to a wide range of discussions. You may find boards on wholesale, distribution, supply chain, etc. All of these may lead you in the direction of a wholesale distributor.
However, if you want to get up and running fast, or just don’t have the time to go on a search for wholesale distributors much less ones that drop ship, then the way to go is drop ship directories. These are usually pay services that search out drop shippers for you then give you access to their contacts; there are many of these on the Internet today, and many are very good. As with anything on the Internet you must be very careful of the scams out there. Many drop ship directories will end up giving you an outdated list of wholesalers, or when you contact them you will find that they are a true wholesale distributor but they do not drop ship.
Here are some pieces of advice when looking for a quality drop ship directory:
Stay away from the cheap ones! Obviously with everything else in this world you will get what you pay for. If you find one out their for three dollars, you probably are not going to get a good product. In general the one’s that offer the best information are charging $60 or more for a six month membership.
Look for one’s that will do specialty searches! If you get into a drop ship directory and find that they do not have any products that you would like to sell, or think you can sell, then make sure they will go out and find it for you. If they do not do specialty searches then you will end up being stuck with whatever listings they have no matter what.
Find one with a Satisfaction Guarantee! There are several drop ship directories out there that offer a guarantee that all of their listings are true drop shippers, but in my opinion this is not enough. If you get into their directory and find that they have five hundred listings for widget suppliers and they are all real wholesalers you are out your money and only have access to one product. Make sure they guarantee your satisfaction with their product no matter what, especially if you are going to shell out seventy dollars of your hard earned money.
Look for ones that are going to help you out as well, not just give you a list. Do they offer articles and help material on starting your business or are all they just going to give you listings and nothing else.
However you choose to find wholesale drop shipping, keep in mind that as with anything else in this world knowledge is power. Try and find out as much as you can before you jump in to get your feet wet. It will make your startup smoother and help you get the profitability stage much faster.
money making tools
make money blogging
Learn how to earn and how to save paper money from inflation with silver bullion!
Topics: Web Development | No Comments »
Make Sure Your Accounting Software Has Job Cost Functionality
By admin | May 2, 2009
Although it may not be at the top of the average accounting software review, the “Job Cost Report” feature is a feature that, when used to its fullest potential, can increase profits and the bottom-line. Job cost reports take a more focused micro-level view of your company.
All financial software will provide you with big picture reports that summarize your net income, however it is not always easy to see how and where your profits break down, epecially in companies that complete multiple jobs or projects, such as contractors. This is what a job cost module in financial software does - provides reports of the profitability of each job, in real time, instead of the entire organization.
Wondering how this works? At the most basic level, accounting software with job cost tracking will track the to-date cost of a job or project by tracking the man-hours spent on the job. These time loggers are somewhat similar to a time clock that would be used for an hourly employee, although the data is not necessarily treated in the same manner as payroll data.
The software then takes this data and calculates several things for you. It uses the cost-per-hour of the project (for example, the cost-per-hour of payroll for the employees who work on the project) and the revenue earned per hour of the project to provide a summary of the net profit per hour spent on the project.
When you can see the profitability of each project as it progresses, decision making becomes much easier. If you can see that a certain project has a cost per hour that is too high, changes can be made to lower the cost per hour of the project moving forward so that the project results profitably. These calculated decisions are easy to make with simple reports, require less time to make, and reduce the need for reactive or seat of the pants decision making. Further, these reports can be beneficial for improving processes for projects that will be repeated in the future.
If you are in the market for new software and are looking at accounting software reviews, pay attention to the job cost feature. Many reviews focus on the number of features and the overall “flashiness” of the package, which generally is not helpful information. Instead, look for things like:
a) Level of detail in the program as a whole
b) Ability of the software to track time spent on projects in real time
c) Options to manually add and edit job data after the project time is tracked.
Remember that there is a wide variety in accounting software. Since job cost reporting is not used as often as things like accounts payable tracking and payroll reporting, you will likely have to do a bit more digging to answer these questions.
To conclude, job cost tracking is one of the best ways to analyze the profitability of an organization and make adjustments.
Topics: Computers | No Comments »
Can Construction Accounting Software be Used For Contractors that Also Manufacture?
By admin | April 20, 2009
It is not uncommon to find contractors who manufacture the products they install for customers. Some examples include structural steel, custom cabinetry and furniture, and various kinds of low voltage products. Prospective buyers of software with this profile will often have fabrication and assembly job shops that design the products to the customer’s specifications and then have an installation department to install it at the customer’s site. Providing professional design services and providing estimates and quotes are something that contractors and manufacturers often have in common.
Unfortunately, finding a piece of construction accounting software that covers both sides of the business is not as easily done as it is said. Although both sides of the business deal with job cost, there are several issues that arise when trying to integrate the two sides with one piece of software.
To begin with, construction and manufacturing have different sets of constraints when it comes to scheduling jobs. Manufacturing companies (or parts of companies) deal with machines and individuals in job shops. These shops often have to rush jobs in the cue that arise unexpectedly but nonetheless need to be completed as soon as possible. The software used, therefore, has to have the ability to reflect how these rush jobs impact other jobs. Construction, on the other hand, rarely deals with sudden changes and although lead times are often much longer, a new challenge arises in dealing with numerous other variables, such as subcontracting.
Second the cost accounting is different. Manufacturing job costs include direct labor, direct materials, and some kind of overhead allocation. In manufacturing, work in process costs should be accumulated as the job moves from one work center to another. These costs are assets on the balance sheet until the job is completed and shipped. As a result, the cost of inventory constantly changes as the job progresses. Furthermore, manufacturers need to know job progress and be able to project a promise date to the customer.
Construction projects, on the other hand, recognize revenue and costs on a percentage complete or job complete basis. Most contractors do not record costs until they are actually billed for them, regardless of whether or not the labor has been completed. They are concerned with the cost to date of a project in relation to the estimated budget for the project and monitor under or over billing based on the percentage of the job complete and the percentage of the estimated cost incurred to date. This kind of cost break down simply does not work in a manufacturing environment.
Real time cost data is only possible with the right construction accounting software and the right supporting processes. A good software package will give users the ability to track jobs in a linear fashion as the job moves along.
The construction side of the business usually has to deal with project management issues like change orders, RFIs and submittals, which are not relevant for manufacturing. It may also record retainage for jobs and do progress billing, which manufacturers don’t do.
Last of all, manufacturing jobs require quotes that involve a bill of materials which is not usually done in a construction job. Manufacturers like to use software to keep track of things such as change orders, revision histories, and drawings that are not covered by construction software.
To summarize, one piece of software is not going to be able to be used for both sides of the business. As nice as it would be, the two operations differ so dramatically in terms of “relevant information” that even if software existed capable of serving both sides of a business, chances are it would be such a complex system that usability would be a nightmare. As a result, you will need to invest in separate manufacturing and construction software packages. Consult construction software guides to get a good idea of what kind of solutions might be best for your company.
Topics: Computers | No Comments »
Traits to Look for in a Construction Management Software Champion
By admin | April 18, 2009
Once you have made the decision to get new construction software for your business, the question is: Have you designated someone in your company to be the software champion?
Every company, whether a huge corporation or a small local organization needs somebody tasked with leading the charge to evaluate and implement the new software to achieve better efficiencies for the organization. A good software champion will have certain traits that will ensure success.
Here are five traits that you want to look for in your company’s software champion:
Experience in Software Implementation - Learning the ins and outs of software evaluation and implementation on-the-fly will jeopardize your initiative. That’s why your construction software champion must have prior experience evaluating and implementing software and be able to read and understand construction software guides. Keep in mind that the scope of previous experience needed to make a sound decision increases with company size and complexity of operations.
Knowledge - It is important that you select a person to be the software champion that has a good understanding of how your company operates. This knowledge will be extremely beneficial when speaking with vendors during software demos and sales calls as they will be able to identify the good points of the software in question and will also have the knowledge necessary to ask the right questions.
Support - Since the software champion will be making decisions on behalf of the entire company, you must choose somebody that you trust. Selecting new software is a process that involves a lot of time and money. If you have a management team that is indecisive or unwilling to follow the software champion’s recommendations, you will be doomed to waste a lot of time and money in selecting new construction software. When the champion has the full support of management, the project will be more likely to stay on task when the inevitable bumps in the road come up.
Respect of Peers - Without the respect and confidence of his/her peers, the construction software champion won’t get the cooperation needed to gather information and data to move to a new system. Choose a well-respected individual to lead the charge for new software.
Change Advocate - Implementing new construction accounting software will be a big change for your company. As such, it is important to select a software champion that is not afraid of change and is comfortable being in the position of change advocate. He or she will need to have the ability to address concerns that arise from other employees in a respectful and patient manner as well as the technical expertise to evaluate and select the right software, whether viewpoint software or a better alternative.
In conclusion, the software champion that you select to oversee your new construction software implementation will be one of the most critical aspects to the project’s success. Finding a person with the right background that will get support from management and peers will greatly increase your chances of success and improvement from the new software.
Topics: Computers | No Comments »
How to repair your computers registry easily
By admin | April 13, 2009
There comes a time when our beloved computers just don’t seem to work as fast as they used to and that’s when a lot of people call the computer repair guy or take the computer to the PC clinic which can cost a fortune. Although this is probably a sensible thing to do, there should be one thing you should check before calling the repair guy and that is to check the registry on your computer for errors. Registry problems can cause major problems on your PC but the good thing is they can be easily fixed.
The registry is like a framework of program settings and user preferences and basically it keeps all of our software and programs running the way we want. It is important that we keep the registry in good order to ensure that our PC’s perform at their best. If you would like to repair or check the registry on your computer for errors, please follow the steps below.
There are two ways you can go here; firstly you could fix the registry errors yourself by using a registry editor. This is quite risky though because one mistake here and your computer may become unbootable so this should only be attempted if you are comfortable editing registry settings. If you are attempting to fix things manually always make a backup of the registry before editing so you can restore the backup if things go wrong.
The other option is to use a registry repair program to fix registry problems. This is the quickest and safest route to take when tackling registry errors. Most registry repair software will automatically backup the computers registry so you don’t need to worry about it. Then you just need to scan your PC which should take a few moments and you will then be given the results of the scan. This will tell you if you have a clean registry in which case you would have to do nothing further or it will give you the details of any problems contained in the registry and provide instructions on how to fix them.
Fixing registry errors with softwareis usually a simple process where you will be guided through on screen instructions and the problems are usually removed in just a few clicks of the mouse. After you have fixed the registry problems it’s a good idea to reboot your PC and all being well you will notice a substantial performance increase from your PC.
Finding a good registry repair program isn’t difficult but there are many so choosing the right one may seem like a daunting task. All you need to do is find a good review type website from which you can gather which registry repair program is best for your needs.
Read more on registry repair software and be sure to check out our registry fix review and find out why it is our featured product!
Done the job? Have some fun! Grab yourself cheap PlayStation 3 - frugal tips of doing that.
Topics: Computers | No Comments »
Wooden Chair and Good Quality Furnishing
By admin | March 21, 2009
Quick Product Guide Review about Wood Chair
If you are pretty artistic with woodworking, you can make a wood chair out of no more than four pieces. You make the back all one piece, expanding from the top of the head rest to the bottom of the legs. You can then affix the seat to that horizontally, and attach the front legs (also one piece) to that. The fourth piece, of option, is a brace for the legs on the bottom. Making the joints stable using this design is a little tricky, and you should likely get someone who knows what they are doing to help you. Nevertheless, with proper tools and skills, you can make this style of wood chair in as little as an hour.
Expert’s product reviews
How you go about making a wood chair depends on how determined you are. There are, of course, many different kinds of wood chairs. There are wood folding chairs, hand tooled wood restaurant chair, and even wooden recliners. Basically, everything you see in a store can be made at home. Still, I advice that you stay away from any of these. The best thing to do is try something simple that you know you will be able to succeed at. If it is a little bit simple looking, so what? You can always try for something more hard the next time, and best of all, you have a finished project – a usable chair.
When most people think about a first project in woodworking, they picture a wooden stool. A stool, everybody figures, is as simple as it can get. This seems logical at first – stools are small , they only have 3 legs, and they don’t have to be much to look at. No, wood chairs are a much better initial project than a stool. Once you start working on it, you will realize how hard it really is. Wooden stools have to be stable and steady , and there is a lot of detail work.
Aside from that, one time you are done, what do you have? Nothing but a stool. How often do you really need to use that! If you like rustic wood furniture, a superior wooden chair will last you for years and years. You will be able to show it off to your friends, allowing them know how crafty you are with your hands. Best of all, there are many wood chair designs that are not very difficult to make. When I made my first wood chair, in fact , I had no woodworking skills at all. I was completely new to it, and I only had a few basic tools. Read more reviews about others including Technology and Gadgets.
Topics: Product Reviews | No Comments »
« Previous Entries